Stop fighting conflicting datasheets and cryptic HAL errors. Simplivu understands your hardware, generates validated firmware, and flashes it in seconds.
Simplivu isn't just a chatbot. It's a complete Digital Twin environment that simulates your hardware before you flash.
// AI Generated Firmware for STM32F446RE
void blink_pattern(void) {
// 1. Initialize GPIOA Clock
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
// 2. Set PA5 (LED) as Output
GPIOA->MODER &= ~GPIO_MODER_MODE5;
GPIOA->MODER |= GPIO_MODER_MODE5_0;
while(1) {
// Double blink pattern
GPIOA->ODR ^= GPIO_ODR_OD5; // Toggle
HAL_Delay(100);
GPIOA->ODR ^= GPIO_ODR_OD5;
HAL_Delay(100);
HAL_Delay(800); // Wait
}
}
Type "Blink LED fast" and watch it happen. The AI writes the C code, compiles it, and flashes your board in under 5 seconds.
Don't just read code—see it. Our engine parses your firmware timings and animates a cycle-accurate SVG model of your board.
It knows your exact pinout, clock configuration, and active registers. It doesn't hallucinate; it reads the silicon.
Traditional embedded development is 80% reading PDFs and 20% coding. Simplivu flips that ratio.
Join the waitlist for early access to the VS Code extension.